All kinds of small intelligent electrical appliances have came into various areas of life with the high-tech development, the core component of them are small motors, they will directly affect the efficiency and life of machines .To keep these machines running like new, they depend on a proven electrical insulation system. The system provides protection from temperature changes, chemicals and moisture.
Product Summary
ELANTAS Zhuhai has various products meet the requirements of small motor customers.The unsaturated polyester resins have excellent penetration, good bond strength and excellent electrical properties. Water emulsion are environmental friendly resins with excellent bond strength and suitable for use in hermetic application. Air dry resins can fast cure with excellent electrical properties.
Solutions For
- Moisture Resistance
- High Adhesion
- Low Dielectric Dissipation
- High Heat-resistance
- Fast Cure
- High Temperature stress
- Fix Coils
- Environmentally Friendly
| Product | Base Resin | Unique Characteristics | Viscosity @25°C,mPa·s | Cure Schedule | Application Method | Thermal Class |
| 009-0008 | ALKYD VARNISH | Single-component, fast air drying, anti-tracking, fungicidal varnish. Available different color version. | 100-125s @B4 21°C | 45-60 MINUTES @20°C 15-20 MINUTES @80°C | DIP | 180 °C |
| STERLING 77X-010 | ALKYD VARNISH | A clear, fast air drying or low temperature cure insulating varnish for impregnating and seal coating. Available in clear or black versions. | 40-100 | 20-30 MINUTES @25°C | DIP | 180/200°C |
| GRC59-33KB | EPOXY EMULSION | Single-component, no co-solvent, fast cure, environmentally friendly product, excellent resistance to chemicals and water. | 10.5-12.5s @TU4 | 1-3 HOURS @120-130°C | DIP/ROLL | 180 °C |
| PED1000-70 | WATER SOLUBLE POLYESTER | Single-component, economic efficiency, environmentally friendly product for general purpose use. Available in various non-volatile content versions for application. | 1600-2500 | 2-12 HOURS @110-150°C | DIP/TRICKLE/ROLL DIP | 180/220°C |
| PED1000-70FC | WATER SOLUBLE POLYESTER | Single component, economic efficiency, environmentally friendly product with low temperature and fast curing. Available in various non-volatile content versions for application. | 18000-30000 | 1-3 HOURS @110-130°C | DIP/TRICKLE/ROLL DIP | 180℃ |
| PED 2500 | WATER SOLUBLE POLYESTER | Single component, environmentally friendly product for general purpose use with no co-solvent for zero Volatile Organic Content (VOC). Also available in other nonvolatile content versions. | 30-900 | 2-4 HOURS @120-150°C | TRICKLE/ROLL DIP | 180/200°C |
| GRC59-36EB | EPOXY EMULSION | Single-component, low temperature and fast cure, environmentally friendly product, excellent resistance to chemicals and water. | 15-40s, Tu4# | 1-3 HOURS @110-130°C | DIP/TRICKLE/ROLL DIP | 180℃ |
| GRC59-30MT | EPOXY EMULSION | Single component, solventless, strong bond strength and good chemical resistance | 10-20s, Tu4# | 2-3HOURS @140-150°C | DIP/TRICKLE | 180℃ |
| DOBECKAN FT 2001/500 K.A & K.B | UNSATURATED POLYESTERIMIDE | Two-component system with excellent high temperature bond strength. The cured material displays very high resistance to tropical influences, solvents, oil, and other chemicals. | 469-519 | 40 MINUTES @130°C 15 MINUTES @150°C | DIP | 180/200°C |
| 075-0015 | UNSATURATED POLYESTER | Two-component system with excellent high temperature bond strength with long catalysed stability. Available in low viscosity ref LVT075-0015. | 500-800 | 50-60 MINUTES @140-150°C | TRICKLE/DIP | 180℃ |
| 075-3798 | UNSATURATED POLYESTER | Two-component system especially suited where high resiliency and high bond strength at elevated temperatures are required. | 200-400 | 30–50 MINUTES @130-140°C | TRICKLE/ROLL DIP | 180℃ |
| 075-3286 | UNSATURATED POLYESTER | Two-component system ,low viscosity and well penetration. | 400-500 | 50-60 MINUTES @130-150°C | TRICKLE | 180℃ |
| Ranvar R2003S | UNSATURATED POLYESTER | It exhibits good tank stability coupled with good bond strength, low shrinkage and chemical / moisture resistance. Available in low viscosity version and flammable retardant version. | 350-650 | 1-2 HOURS @120-130°C | TRICKLE/ROLLDIP/VPI | 180℃ |
| PED 600 HI BOND POLYESTER | UNSATURATED POLYESTER | Low viscosity, fast curing and excellent heat resistance. | 235 - 305 | 1 HOUR @160-170°C | DIP / TRICKLE / ROLL DIP | 180℃ |
| PE 820 HB | UNSATURATED POLYESTER | Two-component system with high bond strength. It has excellent adhesion, adhesive hard and flexibility, good abrasion resistance, low shrinkage, good chemical corrosive resistance. | 70-90s @Tu4 | 1 HOUR @130-150°C | TRICKLE/ROLL DIP | 180℃ |
| DOBECKAN FT2001 LE | UNSATURATED POLYESTERIMIDE | Two-component system, low emission and high bond strength at elevated temperature, high flexibility. | 500-1000 | 30-60 MINUTES@130-150°C | TRICKLE/ROLL DIP/DIP | 180℃ |
| 5183 SW | UNSATURATED POLYESTER | Two-component system in low viscosity，fast curing and long pot life. | 80-150 | 30-60 MINUTES @120°C | DIP/TRICKLE | 180℃ |
| GRC 20 | EPOXY REISN | Excellent heat resistance and mechanical properties，good adhesion and high bond strength. | 1000-2000 | 30-60 MINUTES @130-150°C | TRICKLE/ROLL DIP/DIP | 180℃ |
| 075-4715 | UNSATURATED POLYESTER GEL COAT | Two-component system with highly filled polyester and well crack-resistant. | 10000-30000 | 20-30 MINUTES @140-150°C | TRICKLE/BRUSH | 200℃ |
| 075-2715 | UNSATURATED POLYESTER GEL COAT | Two-component system with highly filled hard polyester. It dose not crack in deep section as a result of mechanical or thermal stress loads and has excellent electrical properties； lower viscosity version LV075-2715 is available. | 5500-7500 | 20-30 MINUTES @140-150°C | TRICKLE/BRUSH | 180℃ |
| 075-2715 M | UNSATURATED POLYESTER GEL COAT | Improve on traditional 075-2715 which work in hard environment.The features of this system is more hard and flexible. It does not crack in deep section as a result of hard mechanical or thermal stress loads. Excellent electrical properties. | 10000–12000 | 30-60 MINUTES @140-150°C | TRICKLE /BRUSH | 180℃ |
| GRC 20 GC | EPOXY GEL COAT | Two-component, resilient, highly filled hard polyester with excellent abrasion resistance and excellent electrical properties. | - | 5-8 MINUTES @120°C | TRICKLE/BRUSH | 180℃ |
| E 300-GC | EPOXY GEL COAT | Excellent heat resistance and mechanical properties, good adhesion and high bond strength. | 290000-390000 | 1 HOUR @140°C | TRICKLE | - |